Fencing

Close board fencing or sometimes called feather board fencing is a robust fence that is built on site, by firstly excavating the correct size hole and fixing the post into a concrete foundation and then fixing Arris rails into the post followed by another post and so on.

With the nature of this kind of fencing, as it’s not a panel product but built in situ, it can be made to follow the contours of the ground, running up or down slopes, which is good if you don’t like to see steps along the top of your fence only smooth flowing lines which is aesthetically pleasing to the eye.

Close board with 100 x 100mm timber posts and gravel boards. The most economical type.

Close board with reinforced concrete posts and gravel boards is more robust and will last longer.

Larch lap panels fitted onto 100 x 100mm timber posts are our most economical solution for garden privacy and security. But something to bear in mind is if you have a gradient along your boundary then the panels might have to be stepped so that they can run up or down the slope. These can also be fitted as panels with trellis on top which not only looks really good but gives you a bit more privacy.

All panels are Tanalith treated Green or Tanatone Brown.

These can also be fitted as panels with concrete posts and gravel boards, using reinforced concrete posts will make the fence much sturdier, and on a gentle slope we can sometimes take up the difference in ground level by digging in one end of the gravel boards thus keeping the fence level across the top and also the panels will sit on the concrete gravel boards and not in the ground, which will extend the life of the panels.

Another option is to use our fully framed close board panels, although slightly more expensive they are sturdier and tend to last around 35-40% longer than the lapped panels.

Timber palisade fencing or picket fencing as it is also known is great for front gardens where privacy is not the main priority, it gives an attractive border to your property whilst stopping pedestrians from cutting through your lawn or drive to reach your neighbours front door, which can be very annoying. It is also ideal for fencing around ponds or fencing around swimming pools.

We recommend using timber morticed posts and rails and individual palings which are fixed onto the rails once they are concreted into position, this will give you that bespoke made to measure professional finish which is very sturdy, we can also get them ready made into panels, a slightly cheaper option but still of a better quality than you can get from your local DIY store. It comes in two styles of finish typically, you can have pointed tops or rounded tops whichever is your preference. We also supply picket fencing with a PAR finish which can be used for school and nursery fencing or anywhere small children are in contact with the fence.

Whichever style you choose they all come with a full compliment of gates, made to measure to any size you require to finish off your project.

Every style of fencing comes with its own matching gates which can be built to fit almost any size combination or situation.

Our timber garden gates are fully framed, ledged and braced for stability and strength and clad with feather edged boards as standard or our tongue and groove boarded gates give a stronger defence against trespass for a slight increase in price. Whichever gate finish you decide upon they all come installed with galvanised fittings to withstand the elements.

These Steel framed driveway gates have a powder coated finish which give the gates a longer life span, that and the solid build on these frames mean they won't start to sag and drag on the ground.

Field gates are great for stopping unwanted vehicles entering your property and give the rural look to your entrance way.

This fence is very versatile and is stronger than single bar mesh panel fencing. The Twinguard system is an ideal solution for schools and sports applications including MUGAs (Multi use games areas) and ball stop fencing as it has a flat unobtrusive profile but is strong enough to take ball impacts, for repeated ball impacts our Sports Bronze Rebound mesh is recommended.

The panels are fixed to steel posts with anti vandal fixings.

Standard gates are available or tailored-made to suit your requirements. All gates are supplied with rear hung adjustable hinges, pad-lockable drop-bolts, multi-holed to suit site conditions complete with anti-climb protection.

Sports Bronze Rebound Fencing is designed for medium to high impact sports. The integrated rebound panel gives an incredibly true ball rebound and excellent durability. The anti-vibration PROFIX Twin clamp assembly provides a smooth and flush detail, protecting against personal injury and product damage. 

Heights of 2m, 3m, 4m, 4.5m and 5m are available. Heights above 3m can be achieved using panel increment sections thus providing a quick and safe installation.

We also supply a full range of high-quality sports equipment including: Basketball hoops & boards, Tennis posts & nets, 5-a-side and full-size football goals, Badminton posts & nets, Volleyball posts & nets, Netball hoops & posts, Trampolines and more.

Typical applications include: MUGA pitches, football pitches, skate parks, rugby pitches, tennis courts and hockey pitches.

Chainlink fencing is a traditional fence for boundary demarcation. It comes in roll form and is assembled and strained on site. 

It can be erected on steel or concrete posts and can have barbed or razor wire toppings for higher security.

Steel Palisade Fencing is a strong and durable construction providing excellent protection against climbing and cut-through. Supplied galvanised only or galvanised and powder coated to any RAL colour. Can be single pointed, triple pointed, square tops, rounded & notched tops or rounded only.

We supply additional toppings for security fences including razor wire coils, razor wire tape, barbed wire, rotating spikes. We can also prepare fence posts to take electric security fence on the back.

Standard gates are available or tailored-made to suit your requirements including: Locinox locks, HYDRCLOSE self-closers, razor wire extensions and other bespoke items to suit your needs. All gates are supplied with rear hung adjustable hinges, pad-lockable drop-bolts, multi-holed to suit site conditions complete with anti-climb protection. 

The FASTGUARD system provides excellent protection against climbing and cut-through and also a robust demarcation to deter against unwanted intrusion and vandalism. FASTGUARD is versatile and suits almost every application from low cost demarcation to the highest security establishments.

The expanded metal mesh is formed from a single sheet of steel making it a highly durable fabric for a fencing system with excellent see through visibility. With anti-tamper fixings as standard, the system is ideally suited for all sectors including trackside, utilities, schools, industrial and ports.

Standard gates are available or tailored-made to suit your requirements. All gates are supplied with anti-tamper adjustable hinges, pad-lockable drop-bolts, multi-holed to suit site conditions complete with anti-climb protection.

Our metal railings are designed and manufactured to provide both security and attractive aesthetics characteristics.

We offer many different designs and styles such as straight bar, bow top, interlaced bow top and designer railings. All are available in galvanised finish and galvanised and polyester powder coated to a colour of your choice.

We also can places railings wherever needed, for example, linking brickwork to complete a design.

Accompanying gates can be supplied and installed.

Our timber knee rail fence is ideal for a low level boundary marker and is often used for car park areas, pedestrian footpaths and general demarcation.

Our timber knee rail is manufactured and installed using 100mm x 100mm square sawn bird mouth timber posts with 100mm x 100mm square sawn horizontal wooden rails and held in place with a metal galvanised strap. Posts are set in concrete foundations at between 1.8m – 3m post centres. Another variation of knee rail is by using either concrete or timber posts with preformed holes and galvanised tubing which slides into and through the posts. 

If the hoarding is going to be in place for an exceptionally long time or where there is an intention to reuse the hoarding, steel hoarding is often the better option. To give flexibility and ease of movement around the site, Steel hoardings can be supplied on demountable posts or, alternatively, fitted to fixed steel or timber posts. 

The hoarding posts and panels for steel hoarding can be pre-finished in the colour specified by the contractor, and with a polyester powder coating applied on top of a galvanised finish.

Our Temporary Fence Panels are 3.5m wide & 2.0m tall. All of our temporary perimeter mesh fencing panels come as standard with rounded top corners, which are more durable then square top panels, & with re-enforced corner brackets. The temporary fence panel is fit with anti-climb mesh which makes it a more secure perimeter fence panel and less prone to damage.